首页 > 新闻资讯 > 公司新闻 >

低氮燃烧器六大部件

时间:2018-07-23 17:47    作者:admin 返回列表

低氮燃烧器零部件以及相关构件,按其功用可分为六大功能系统:主体结构、控制系、点火系、燃料供应系、燃烧系、动力系。
Parts and components of low nitrogen burner and related components can be divided into six functional systems according to their functions: main structure, control system, ignition system, fuel supply system, combustion system and power system.

一、主体结构
1. Main structure

这一部分构成了低氮燃烧器的主体结构与轮廓。其包括有壳体以及相关的零配件,其他功能系统上的产品均安装于主体结构上。
This part constitutes the main structure and outline of the low nitrogen burner. It includes the shell and related parts, and the products on other functional systems are installed on the main structure.

二、控制系
Ii. Control system

该部分产品包括有控制器、伺服机构(电机及液压缸)、火焰监视器、压力或温度开关等。低氮燃烧器控制的核心部分,包括被称为比例调节仪的过程管理控制器、负责检测阀门漏点的燃气检漏仪等,均负责采集并触发各动作的信号,相当于低氮燃烧器的大脑。
The products include controllers, servo mechanisms (motors and hydraulic cylinders), flame monitors, pressure or temperature switches, etc. The core parts of low-nitrogen burner control, including the process management controller called the proportional controller and the gas leak detector, which is responsible for detecting valve leakage points, are responsible for collecting and triggering signals of each action, which are equivalent to the brain of the low-nitrogen burner.
低氮燃烧器
三、点火系
Iii. Ignition system

该部分产品包括有点火变压器、点火电极、高压线。点火变压器:用于产生高压电流,并通过电极尖端放电为低氮燃烧器点火的产品。点火电极:更谈不上什么技术含量的产品,除非形状太怪异,用的太少,编者是不会储存原装产品,也不会建议用户使用。高压线:只是一种耐高温、高电压的电源线。
This part of products include ignition transformer, ignition electrode, high voltage line. Ignition transformer: product used to generate high voltage current and to ignite a low nitrogen burner by discharging at the electrode tip. Ignition electrode: not to mention a technical product, unless the shape is too strange and too little is used, the editor will not store the original product or recommend it to the user. High voltage line: it is just a high temperature resistance, high voltage power line.

四、动力系
Iv. Power system

在常用的低氮燃烧器上,应该仅有电动机与动力有关。
In conventional low nitrogen burners, only electric motors should be involved in power.

五、燃料供应系
Fuel supply system

在低氮燃烧器上,这是较为繁杂的一套系统之一,事实上涉及到这一系统的机械产品,远比控制系上的电气产品要繁杂得多。油泵、油嘴、燃油加热器、油杯、输油管、燃油电磁阀燃气阀(包括燃气电磁阀)、燃气调压器、燃气过滤器
This is one of the more complex systems on a low-nitrogen burner, and in fact the mechanical products involved in this system are much more complex than the electrical products on the control system. Oil pump, oil nozzle, fuel heater, oil cup, oil pipeline, fuel electromagnetic valve gas valve (including gas electromagnetic valve), gas regulator, gas filter

六、燃烧系
Vi. Combustion system

低氮燃烧器行业最有技术含量的一个系统。实际上,无论负责控制的电气产品有多么尖端的技术,还是油泵的制造有何精良,这些技术水平的高低与手段都有低氮燃烧器制造厂的自身能力无关,但燃烧系统的设计则他们必须自力更生的。所以,燃烧系的水准才决定了一个低氮燃烧器的能力高下。这一部分产品包括有燃烧筒、强制送风的鼓风机叶轮、火焰盘、油枪、气芯管、以及内置或外置的扩散头等。这一部分产品,构成了空燃预混装置。

Low nitrogen burner industry is the most technical content of a system. In fact, no matter how sophisticated the electrical products under control are, or how sophisticated the pumps are, the level of these technologies has nothing to do with the capabilities of the low-nitrogen burner manufacturers themselves, but the design of combustion systems has to be self-reliant. Therefore, the level of combustion system determines the capability of a low nitrogen burner. This part of the product includes a combustion cylinder, a forced air blower impeller, a flame disc, an oil gun, a gas core tube, and a diffuser inside or outside. This part of products, the composition of air - burning premix device.

上一篇:低氮燃烧器的技术性能 下一篇:使用低氮燃烧器一般将NOx降低到多少?

Copyright © 2018 北京创为机电设备有限公司 (http://www.bjcwkj.com) 专注于低氮燃烧器设计、改造、销售安装,锅炉低氮改造锅炉维护保养网站地图   备案号:京ICP备17061108号-1

技术支持:蓝杉互动